IJEM
|
New book
IJEM No.24
Contents
Paper
- Study on Transfer of Insulating Material with Discharge Pulses
- Akihiro Goto, Minoru Dohi and Hiroshi Fujiwara
- Relationship between electrode diameter and wear ratio in scanning electrical discharge machining
- A. Hirao, T. Tani, H. Gotoh, N. Mohri
- Surface Characteristics of Molding Die Treated by Electron Beam Irradiation
- Yoshihito Hagihara, Masaaki Sano and Akira Okada
- Investigation of Separation Method for Gallium Nitride with Internal Modified Layer by Ultrashort Pulsed Laser
- Yasuhiro Okamoto, Motoki Ota, Akira Okada
- Study on improvement of wear resistance for Zirconia by large area electron beam irradiation
- Togo Shinonaga, Mitsuhiro Kimura, Motohiro Inoue, Akira Okada
- Investigation of depth-dependent characteristics in micro EDM drilling based on direct inter-electrode area observation
- Guodong Li , Wataru Natsu , Zuyuan Yu
Papers in the Journal of the Japan Society of Electrical Machining Engineers in 2018
Call for Papers
Guide for Authors
Manuscript Format
IJEM No.23
Contents
Paper
- Removal Mechanism of Glass Using Lath-Type Electrochemical Discharge Machine
- Katsushi Furutani, Kazuyuki Arai
- Electrode Feeding Devices Based on AZARASHI (Seal) Mechanism
for Small-Hole Electrical Discharge Machining
- Katsushi Furutani, Daisuke Hiraoka
- Performance of Electrochemical Discharge Machining by Forced Discharge Dispersion (2nd Report) Monitoring of Machining Current
- Katsushi Furutani, Hiroyuki Shintani, Yasuo Murase, Shuichi Arakawa
- Effect on Mold Releasability on EDM Finished Surface using Powder Mixed Working Fluid
- Ryoji Kitada, Keita Fujii, Ruixiang Wang, Akira Okada
- Experimental Investigation on Machining Characteristics of Difficult-to-machine Materials with Electrochemical Mechanical Polishing
- Kohei Otake, Yuki Ishii, Wataru Natsu
- Influence of Pulse Duration on Effective Energy on Material Removal in Micro-processing of Mild Steel by Several Hundred Nanoseconds Pulse Laser
- Yasuhiro Okamoto, Mizuna Ito, Akira Okada, Togo Shinonaga
- Study on Variation of Burr Height in Micro-deburring with Large-area Electron Beam
- Togo Shinonaga, Tsubasa Sakai, Yasuaki Kimura, Akira Okada
Papers in the Journal of the Japan Society of Electrical Machining Engineers in 2016
Call for Papers
Guide for Authors
Manuscript Format
IJEM No.22
Contents
Paper
- Electrical Discharged Coating by Spark Plasma Sintered Tungsten Porous Electrode
- Kensei Kaneko, Kazuhiko Furukawa, Kokoro Kihara, Naritoshi Aoyagi
- Study on Reduction of Discoloration Area in Micro-drilling of Multi-layered Artificial Skin
by Picosecond Pulsed Laser
- Yasuhiro Okamoto, Akira Eguchi, Naoto Maeda, Akira Okada, Shogo Minagi,
Qiuyue Pan, Keiji Jin, Goro Nishigawa
- Investigation of Influence of Low-level Voltage on Machining Characteristics in Pulse Wire ECM
- Kouki Yamaguchi, Wataru Natsu
- Study on ECM Characteristics in Hole Machining with Electrolyte Suction Tool
- Hiroshi Nagoya, Wataru Natsu
- Improvement of Surface Characteristics for Long Life of Metal Mold
by EDM in Chromium Powder Mixed Working Fluid
- Ruixiang Wang, Ryoji Kitada, Ryota Toshimitsu, Akira Okada
- Two-Phase Simulation of Electrochemical Machining
- Garg Mayank, Masanori Kunieda
- A Fundamental Study of Local Electrochemical Nano-processing
- Gota Yamaguchi, Takehiro Kume, Hidekazu Mimura
Papers in the Journal of the Japan Society of Electrical Machining Engineers in 2016
Call for Papers
Guide for Authors
Manuscript Format
IJEM No.21
Contents
Paper
- Study of Deposition Machining Using Electrical Discharge with Reciprocating Rotation in Air Gap
- Atsutoshi Hirao, Takayuki Tani, Hiromitsu Gotoh,
Shoju Aoshima, Naotake Mohri
- Study on Metal Film Formation by Large-area Electron Beam Irradiation
- Togo Shinonaga, Masashi Takata,
Akira Okada, Sadao Sano
- Investigation on Visibility of Drilled Hole in Laser Micro-drilling of Multi-layered Artificial Skin
- Yasuhiro Okamoto, Kiichi Asako, Naoto Maeda,
Akira Okada, Shogo Minagi,Qiuyue Pan,
Keiji Jin, Goro Nishigawa
- Surface finishing achieved by ECM with a moving wire electrode
- Kohta Furuyama, Masanori Kunieda,
Takashi Hashimoto, Takashi Yuzawa
- Development of internal stress measurement technique for Ni electroforming using Shack-Hartmann sensor
- Takehiro Kume, Satoru Egawa,
Hidekazu Mimura
- Observation of Workpiece Surface in ECM Process of WC Alloy Micro-pin with Bipolar Pulses
- Wataru Natsu, Daiki Kurahata
Papers in the Journal of the Japan Society of Electrical Machining Engineers in 2015
Call for Papers
Guide for Authors
Manuscript Format
IJEM No.20
Contents
Information |
18th CIRP Conference on Electro Physical
and Chemical Machining (ISEM ][) |
Paper |
|
Effect of Tilting Jet Flushing Nozzle
on Wire EDM Performance |
Takuro Konishi, Akira Okada, Yasuhiro Okamoto,
Haruki Kurihara |
|
|
Influence of Bead Geometry on Weld Distortion
in Laser
Micro-welding
of Thin Stainless Steel
Sheet with High-speed
Scanning |
NatsuYasuhiro Okamoto,
Satoshi Matsuoka,
Tadanori otowa, Akira Okada |
|
|
Machining Characteristics of Wire Electrical
Discharge Machining on
Insulating Si3N4 Ceramics
-Relationship between Electrical Conductive Layer
and Machining Charateristics- |
Hiromitsu Gotoh, Takayuki Tani, Naotake Mohri |
In Situ Observation of Bubble Traces in
Nickel Electrodeposition |
Satoru Egawa, Takehiro Kume, Hidekazu Mimura |
Effects of Carbon Nanotube Concentration
and
Nickel Matrix Crtstalline on the Elastic
Modulus of
Nickel-based Composite Coatings |
Tsunehisa Suzuki,
Kazushi Yokoyama, Mutsuto Kato, Hiroshi Iizuka |
Proposal and Verification of Area-limited
Electroplating
with Suction Tool |
Atsushi Sato, Wataru Natsu |
Improving Discharge Energy in Micro-EDM
with Electrostatic
Induction Feeding with suction Tool
|
Norliana Mohd Abbas,
Masanori Kunieda |
Direct Observation of Multiple Discharge
Phenomena in EDM
using Transparent Electrodes |
Azumi Mori, Tomoo Kitamura, Masanori Kunieda,
Kohzoh Abe |
|
|
Papers in the Jornal of the Japan Society
of Electrical Machining Engineers in 2014 |
Call for Papers |
|
Guide for Authors |
|
Manuscript Format |
|
|
|
Paper |
Performance of Electrochemical Discharge
Machining
by Forced Discharge Dispersion
|
Katsushi Furutani,
Hiroyuki Shintani, Yasuo Murase, Shuichi
Arakawa |
Relation between Bubble Behavior and Removal
Volume during
Single Discharge with a Thin Electrode
and a Flat-Plate Workpiece |
Hideki Takezawa, Daisuke Yanagida, Naotake
Mohri |
Study on Possibility of Micro-deburring
by
Large-area Electron Beam Irradiation
|
Hajime Yonehara, Akira Okada, Yasuhiro Okamoto |
Singulation Characteristics of Semiconductor
Package
Using Pulsed Fiber Laser and SHG:YAG Laser
|
Yasuhiro Okamoto, Ryoji Kitada, Akira Okada,
Yoshiyuki Uno
|
Proposal and Verification of Electrolyte
Suction Tool
with Function of Gap-width Detection
|
Katsuaki Endo, Wataru Natsu
|
Observation of ECM Gap Phenomena through
Transparent Electrode
|
Wenhao Zhang, Tomoo Kitamura, Masanori Kunieda,
Kohzoh Abe
|
Discharge Machining of Insulating Si3N4 Ceramics with added Al2O3
|
Daiki Hanaoka, Yasushi Fukuzawa, Yuuji Kaneko,
Takenori Harada
|
|
|
IJEM No.18
Contents
Paper |
|
Inverstigation of Machining Characteristics
of Micro-EDM
with Ultrasonically Vibrated Machining
Fluid under
Ultra-small Discharge Fnergy
|
Tomohiko Ichikawa, Wataru Natsu |
|
Electrical Discharge Truing for Electroplated
Diamond Tool
- The Effect of EDM Condition and Electrode
Material - |
Koji Watanabe, Hisashi Minami, Kiyonori Masui |
|
|
Electromagnetic Effects of Electrode
Materials and Sizes
on Discharge Current and Wire Vibration
in Wire-EDM |
Keita Hada, Masanori Kunieda |
|
|
Study on Electrolyte Jet Machining of Cemented
Carbide |
Koji Mizugai, Naoyuki Shibuya, Masanori Kunieda |
|
Study of Improvement of TiCLayer by Electrical
Discharge Coating
|
Nobuyuki Sumi, Akihiro Goto, Hiroyuki Teramoto,
Yusuke Yasunaga, Yoshikazu Nakano |
|
|
Effect of Insulating Si3N4 Ceramics on Removal Rate
by EDM with Piezoelectric Device |
Takayuki Tani, Hiromitsu Gothoh, Atsutoshi
Hirao, Naotake Mohri |
|
|
Investigation of Wire Movement in Fine
Wire EDM
by High-Speed Observation |
Akira Okada, Sho Ichii, Yasuhiro Okamoto |
|
|
Influence of Polarization Plane on Groove
Shape in
Scribing of Sapphire by THG:YAG Laser |
Yasuhiro Okamoto, Shin-ichi Nakashiba, Tomokazu
Sakagawa, Akira Okada, Yoshiyuki Uno |
|
Call for Papers
|
|
|
Guide for Authors
|
|
|
Manuscript Format
|
|
|
|
|
|
|